类 com.fr.third.jgroups.Message
的使用

使用Message的程序包

程序包	说明
com.fr.cluster.engine.transport.context.impl.adaptor
com.fr.ehcache.cluster
com.fr.third.jgroups	Provides top-level public JGroups classes such as Channel, Message, etc.
com.fr.third.jgroups.auth
com.fr.third.jgroups.auth.sasl
com.fr.third.jgroups.blocks	Provides building blocks that are layered on top of channels.
com.fr.third.jgroups.blocks.mux
com.fr.third.jgroups.demos	Provides demonstrations of JGroups functionality.
com.fr.third.jgroups.demos.wb	A distributed whiteboard applet implemented using JGroups.
com.fr.third.jgroups.fork
com.fr.third.jgroups.protocols	Provides implementations of transport protocols which are responsible for sending and receiving messages to/from the network.
com.fr.third.jgroups.protocols.pbcast	Supports probabilistic broadcasts.
com.fr.third.jgroups.protocols.relay
com.fr.third.jgroups.protocols.tom
com.fr.third.jgroups.stack	Support for managing protocol stacks.
com.fr.third.jgroups.tests
com.fr.third.jgroups.tests.perf
com.fr.third.jgroups.util	Provides useful functionality which cannot be assigned to any particular other package.

com.fr.cluster.engine.transport.context.impl.adaptor中Message的使用

参数类型为Message的com.fr.cluster.engine.transport.context.impl.adaptor中的方法

限定符和类型	方法和说明
ClusterMessage	RequestHandlerAdaptor.handle(Message msg)

com.fr.ehcache.cluster中Message的使用

参数类型为Message的com.fr.ehcache.cluster中的方法

限定符和类型	方法和说明
void	JGroupsCacheReceiver.receive(Message msg) Called when a message is received.

com.fr.third.jgroups中Message的使用

返回Message的com.fr.third.jgroups中的方法

限定符和类型	方法和说明
Message	Message.clearFlag(Message.Flag... flags) Clears a number of flags in a message
Message	Message.clearTransientFlag(Message.TransientFlag... flags)
Message	Message.copy()
Message	Message.copy(boolean copy_buffer) Create a copy of the message.
Message	Message.copy(boolean copy_buffer, boolean copy_headers) Create a copy of the message.
Message	Message.copy(boolean copy_buffer, short starting_id) Doesn't copy any headers except for those with ID >= copy_headers_above
Message	Message.copy(boolean copy_buffer, short starting_id, short... copy_only_ids) Copies a message.
Message	Message.dest(Address new_dest)
Message	Message.makeReply()
Message	Message.putHeader(short id, Header hdr) Puts a header given an ID into the hashmap.
Message	Message.setBuffer(Buffer buf) Note that the byte[] buffer passed as argument must not be modified.
Message	Message.setBuffer(byte[] b) Note that the byte[] buffer passed as argument must not be modified.
Message	Message.setBuffer(byte[] b, int offset, int length) Sets the internal buffer to point to a subset of a given buffer.
Message	Message.setFlag(Message.Flag... flags) Sets a number of flags in a message
Message	Message.setFlag(short flag) Sets the flags from a short.
Message	Message.setObject(java.lang.Object obj) Takes an object and uses Java serialization to generate the byte[] buffer which is set in the message.
Message	Message.setScope(short scope)
Message	Message.setTransientFlag(Message.TransientFlag... flags) Same as setFlag(Flag...) except that transient flags are not marshalled
Message	Message.setTransientFlag(short flag)
Message	Message.src(Address new_src)

参数类型为Message的com.fr.third.jgroups中的方法

限定符和类型	方法和说明
void	ReceiverAdapter.receive(Message msg) Called when a message is received.
void	MessageListener.receive(Message msg) Called when a message is received.
void	JChannel.send(Message msg)
abstract void	Channel.send(Message msg) Sends a message.

com.fr.third.jgroups.auth中Message的使用

参数类型为Message的com.fr.third.jgroups.auth中的方法

限定符和类型	方法和说明
boolean	X509Token.authenticate(AuthToken token, Message msg)
boolean	SimpleToken.authenticate(AuthToken token, Message msg)
boolean	RegexMembership.authenticate(AuthToken token, Message msg)
boolean	MD5Token.authenticate(AuthToken token, Message msg)
boolean	Krb5Token.authenticate(AuthToken token, Message msg)
boolean	FixedMembershipToken.authenticate(AuthToken token, Message msg)
boolean	DemoToken.authenticate(AuthToken token, Message msg)
abstract boolean	AuthToken.authenticate(AuthToken token, Message msg) This method should be implemented to perform the actual authentication of joining members.

com.fr.third.jgroups.auth.sasl中Message的使用

返回Message的com.fr.third.jgroups.auth.sasl中的方法

限定符和类型	方法和说明
Message	SaslClientContext.addHeader(Message msg, byte[] payload)
Message	SaslServerContext.nextMessage(Address address, SaslHeader header)
Message	SaslContext.nextMessage(Address address, SaslHeader saslHeader)
Message	SaslClientContext.nextMessage(Address address, SaslHeader header)

参数类型为Message的com.fr.third.jgroups.auth.sasl中的方法

限定符和类型	方法和说明
Message	SaslClientContext.addHeader(Message msg, byte[] payload)

com.fr.third.jgroups.blocks中Message的使用

声明为Message的com.fr.third.jgroups.blocks中的字段

限定符和类型	字段和说明
protected Message	RequestCorrelator.ResponseImpl.req
protected Message	Request.request_msg

参数类型为Message的com.fr.third.jgroups.blocks中的方法

限定符和类型	方法和说明
protected <T> GroupRequest<T>	MessageDispatcher.cast(java.util.Collection<Address> dests, Message msg, RequestOptions options, boolean block_for_results)
protected <T> GroupRequest<T>	MessageDispatcher.cast(java.util.Collection<Address> dests, Message msg, RequestOptions options, boolean block_for_results, FutureListener<RspList<T>> listener)
<T> RspList<T>	MessageDispatcher.castMessage(java.util.Collection<Address> dests, Message msg, RequestOptions options) Sends a message to all members and expects responses from members in dests (if non-null).
<T> NotifyingFuture<RspList<T>>	MessageDispatcher.castMessageWithFuture(java.util.Collection<Address> dests, Message msg, RequestOptions options) Sends a message to all members and expects responses from members in dests (if non-null).
<T> NotifyingFuture<RspList<T>>	MessageDispatcher.castMessageWithFuture(java.util.Collection<Address> dests, Message msg, RequestOptions options, FutureListener<RspList<T>> listener) Sends a message to all members and expects responses from members in dests (if non-null).
java.lang.Object	RpcDispatcher.handle(Message req) Message contains MethodCall.
java.lang.Object	RequestHandler.handle(Message msg)
java.lang.Object	MessageDispatcher.handle(Message msg)
void	MessageDispatcher.handle(Message request, Response response)
void	AsyncRequestHandler.handle(Message request, Response response) Invokes a request.
protected void	RequestCorrelator.handleRequest(Message req, RequestCorrelator.Header hdr) Handle a request msg for this correlator
protected void	RequestCorrelator.prepareResponse(Message rsp)
void	ReplicatedTree.receive(Message msg) Callback.
void	ReplicatedHashMap.receive(Message msg)
boolean	RequestCorrelator.receiveMessage(Message msg) Handles a message coming from a layer below
void	Response.send(Message reply, boolean is_exception) Similar to Response.send(Object, boolean), but passes a message instead of an object.
void	RequestCorrelator.ResponseImpl.send(Message reply, boolean is_exception)
<T> T	MessageDispatcher.sendMessage(Message msg, RequestOptions opts) Sends a unicast message and - depending on the options - returns a result
<T> NotifyingFuture<T>	MessageDispatcher.sendMessageWithFuture(Message msg, RequestOptions options) Sends a unicast message to the target defined by msg.getDest() and returns a future
<T> NotifyingFuture<T>	MessageDispatcher.sendMessageWithFuture(Message msg, RequestOptions options, FutureListener<T> listener) Sends a unicast message to the target defined by msg.getDest() and returns a future
protected void	RequestCorrelator.sendReply(Message req, long req_id, java.lang.Object reply, boolean is_exception)
void	RequestCorrelator.sendRequest(long id, java.util.Collection<Address> dest_mbrs, Message msg, RspCollector coll, RequestOptions options) Sends a request to a group.
void	RequestCorrelator.sendRequest(long id, java.util.List<Address> dest_mbrs, Message msg, RspCollector coll)
protected void	RequestCorrelator.sendResponse(Message rsp, long req_id, boolean is_exception)
void	RequestCorrelator.sendUnicastRequest(long id, Address target, Message msg, RspCollector coll) Sends a request to a single destination

参数类型为Message的com.fr.third.jgroups.blocks中的构造器

构造器和说明
GroupRequest(Message msg, RequestCorrelator corr, Address target, RequestOptions options)
GroupRequest(Message msg, RequestCorrelator corr, java.util.Collection<Address> targets, RequestOptions options)
Request(Message request, RequestCorrelator corr, RequestOptions options)
RequestCorrelator.ResponseImpl(Message req, long req_id)
UnicastRequest(Message msg, Address target, RequestOptions options)
UnicastRequest(Message msg, RequestCorrelator corr, Address target, RequestOptions options)

com.fr.third.jgroups.blocks.mux中Message的使用

参数类型为Message的com.fr.third.jgroups.blocks.mux中的方法

限定符和类型	方法和说明
protected <T> GroupRequest<T>	MuxRpcDispatcher.cast(java.util.Collection<Address> dests, Message msg, RequestOptions options, boolean blockForResults, FutureListener<RspList<T>> listener)
protected <T> GroupRequest<T>	MuxMessageDispatcher.cast(java.util.Collection<Address> dests, Message msg, RequestOptions options, boolean blockForResults, FutureListener<RspList<T>> listener)
protected void	MuxRequestCorrelator.prepareResponse(Message rsp)
void	MuxRequestCorrelator.sendRequest(long requestId, java.util.Collection<Address> dest_mbrs, Message msg, RspCollector coll, RequestOptions options)
void	MuxRequestCorrelator.sendUnicastRequest(long id, Address target, Message msg, RspCollector coll)

com.fr.third.jgroups.demos中Message的使用

参数类型为Message的com.fr.third.jgroups.demos中的方法

限定符和类型	方法和说明
void	Draw.receive(Message msg)
void	Chat.receive(Message msg)

com.fr.third.jgroups.demos.wb中Message的使用

参数类型为Message的com.fr.third.jgroups.demos.wb中的方法

限定符和类型	方法和说明
void	Whiteboard.receive(Message m)

com.fr.third.jgroups.fork中Message的使用

参数类型为Message的com.fr.third.jgroups.fork中的方法

限定符和类型	方法和说明
void	ForkChannel.send(Message msg)
protected void	ForkChannel.setHeader(Message msg)

com.fr.third.jgroups.protocols中Message的使用

声明为Message的com.fr.third.jgroups.protocols中的字段

限定符和类型	字段和说明
protected static Message	UNICAST3.DUMMY_OOB_MSG
protected Message	TP.SingleMessageHandler.msg

类型参数类型为Message的com.fr.third.jgroups.protocols中的字段

限定符和类型	字段和说明
protected static Filter<Message>	UNICAST3.dont_loopback_filter
protected static Filter<Message>	UNICAST2.dont_loopback_filter
protected java.util.List<Message>	SHUFFLE.down_msgs
protected Filter<Message>	UNICAST3.drop_oob_and_dont_loopback_msgs_filter
protected java.util.NavigableMap<java.lang.Long,Message>	SEQUENCER.forward_table Maintains messages forwarded to the coord which which no ack has been received yet.
protected java.util.concurrent.BlockingQueue<Message>	SEQUENCER2.fwd_queue
protected java.util.Map<Address,Message>	BARRIER.mcast_queue
protected Table<Message>	UNICAST3.Entry.msgs
protected java.util.Map<Address,java.util.List<Message>>	MAKE_BATCH.oob_map_mcast
protected java.util.Map<Address,java.util.List<Message>>	MAKE_BATCH.oob_map_ucast
protected java.util.concurrent.BlockingQueue<Message>	TP.TransferQueueBundler.queue
protected Table<Message>	UNICAST2.ReceiverEntry.received_msgs
protected Table<Message>	UNICAST.ReceiverEntry.received_msgs
protected Table<Message>	SEQUENCER2.received_msgs
protected java.util.Map<Address,java.util.List<Message>>	MAKE_BATCH.reg_map_mcast
protected java.util.Map<Address,java.util.List<Message>>	MAKE_BATCH.reg_map_ucast
protected java.util.Map<Address,Message>	BARRIER.ucast_queue
protected java.util.List<Message>	SHUFFLE.up_msgs

返回Message的com.fr.third.jgroups.protocols中的方法

限定符和类型	方法和说明
protected Message	FRAG2.FragEntry.assembleMessage() Assembles all the fragments into one buffer.
protected Message	UNICAST2.SenderEntry.getFirstMessage()
static Message	TP.readMessage(java.io.DataInput instream)
Message	SCOPE.MessageQueue.remove()
protected Message	COMPRESS.uncompress(Message msg, int original_size) Returns a new message as a result of uncompressing msg, or null if msg couldn't be uncompressed
protected Message	FRAG2.unfragment(Message msg, FragHeader hdr) 1.
Message	ENCRYPT.Decrypter.visit(Message msg, MessageBatch batch)

返回变量类型为Message的类型的com.fr.third.jgroups.protocols中的方法

限定符和类型	方法和说明
static java.util.List<Message>	TP.readMessageList(java.io.DataInput in, short transport_id)

参数类型为Message的com.fr.third.jgroups.protocols中的方法

限定符和类型	方法和说明
protected void	TP._send(Message msg, Address dest)
void	SCOPE.MessageQueue.add(Message msg)
protected void	TP.BaseBundler.addMessage(Message msg, long size)
protected void	SEQUENCER.broadcast(Message msg, boolean copy, Address original_sender, long seqno, boolean resend)
protected void	SEQUENCER2.broadcast(Message msg, long seqno)
protected void	SEQUENCER.deliver(Message msg, Event evt, SEQUENCER.SequencerHeader hdr)
protected void	SEQUENCER2.deliver(Message msg, Event evt, SEQUENCER2.SequencerHeader hdr)
protected void	SEQUENCER.forward(Message msg, long seqno, boolean flush)
protected void	SEQUENCER.forwardToCoord(long seqno, Message msg)
protected void	RELAY.forwardToCoord(Message msg) Wraps the message annd sends it to the current coordinator
protected void	FRAG2.fragment(Message msg) Send all fragments as separate messages (with same ID !).
protected AsciiString	TP.getClusterName(Message msg)
protected static GMS.GmsHeader	AUTH.getGMSHeader(Message msg)
protected boolean	AUTH.handleAuthHeader(GMS.GmsHeader gms_hdr, AuthHeader auth_hdr, Message msg) Handles a GMS header
protected void	UNICAST3.handleDataReceived(Address sender, long seqno, short conn_id, boolean first, Message msg, Event evt) Check whether the hashtable contains an entry e for sender (create if not).
protected boolean	UNICAST2.handleDataReceived(Address sender, long seqno, short conn_id, boolean first, Message msg, Event evt) Check whether the hashmap contains an entry e for sender (create if not).
protected void	UNICAST.handleDataReceived(Address sender, long seqno, short conn_id, boolean first, Message msg, Event evt) Check whether the hashtable contains an entry e for sender (create if not).
protected void	UNICAST3.handleDataReceivedFromSelf(Address sender, long seqno, Message msg) Called when the sender of a message is the local member.
protected java.lang.Object	UFC.handleDownMessage(Event evt, Message msg, Address dest, int length)
protected java.lang.Object	MFC.handleDownMessage(Event evt, Message msg, Address dest, int length)
protected abstract java.lang.Object	FlowControl.handleDownMessage(Event evt, Message msg, Address dest, int length)
protected java.lang.Object	ENCRYPT.handleEncryptedMessage(Message msg, Event evt, ENCRYPT.EncryptHeader hdr)
protected void	UNICAST3.handleUpEvent(Address sender, Message msg, UNICAST3.Header hdr)
protected void	FC.handleUpEvent(FcHeader hdr, Message msg) 已过时。
protected void	ENCRYPT.handleUpEvent(Message msg, ENCRYPT.EncryptHeader hdr)
protected void	FlowControl.handleUpEvent(Message msg, FcHeader hdr)
protected java.lang.Object	RELAY.handleUpEvent(Message msg, RELAY.RelayHeader hdr)
protected void	TP.loopback(Message msg, boolean multicast)
protected static int	SIZE.numHeaders(Message msg)
protected void	TP.passMessageUp(Message msg, AsciiString cluster_name, boolean perform_cluster_name_matching, boolean multicast, boolean discard_own_mcast)
protected void	MAKE_BATCH.queue(Message msg)
protected void	ENCRYPT.Decrypter.queueUpMessage(Message msg, MessageBatch batch)
void	RELAY.Receiver.receive(Message msg)
protected void	UNICAST3.retransmit(Message msg) Called by the sender to resend messages for which no ACK has been received yet
void	UNICAST.retransmit(Message msg) Called by AckSenderWindow to resend messages for which no ACK has been received yet
void	TP.Bundler.send(Message msg)
void	TP.BaseBundler.send(Message msg)
void	TP.SenderSendsWithTimerBundler.send(Message msg)
void	TP.SenderSendsBundler.send(Message msg)
void	TP.TransferQueueBundler.send(Message msg)
protected void	TUNNEL.send(Message msg, Address dest)
protected void	TP.send(Message msg, Address dest) Serializes and sends a message.
protected void	PING.sendMcastDiscoveryRequest(Message msg)
protected void	MPING.sendMcastDiscoveryRequest(Message msg)
protected void	BPING.sendMcastDiscoveryRequest(Message msg)
protected void	TP.BaseBundler.sendSingleMessage(Message msg, boolean reset, ByteArrayDataOutputStream out)
protected boolean	SASL.serverChallenge(GMS.GmsHeader gmsHeader, SaslHeader saslHeader, Message msg)
void	FRAG2.FragEntry.set(int frag_id, Message frag) adds on fragmentation buffer to the message
protected void	TP.setSourceAddress(Message msg) If the sender is null, set our own address.
protected boolean	DISCARD.shouldDropUpMessage(Message msg, Address sender) Checks if a message should be passed up, or not
protected Message	COMPRESS.uncompress(Message msg, int original_size) Returns a new message as a result of uncompressing msg, or null if msg couldn't be uncompressed
protected Message	FRAG2.unfragment(Message msg, FragHeader hdr) 1.
protected void	SEQUENCER.unwrapAndDeliver(Message msg, boolean flush_ack) Unmarshal the original message (in the payload) and then pass it up (unless already delivered)
Message	ENCRYPT.Decrypter.visit(Message msg, MessageBatch batch)
protected static void	TP.writeMessage(Message msg, java.io.DataOutput dos, boolean multicast) This method needs to be synchronized on out_stream when it is called

类型变量类型为Message的com.fr.third.jgroups.protocols中的方法参数

限定符和类型	方法和说明
protected void	BARRIER.flushQueue(java.util.Map<Address,Message> queue)
protected void	UNICAST2.handleBatchReceived(Address sender, java.util.Map<java.lang.Short,java.util.List<Message>> map)
protected void	UNICAST.handleBatchReceived(Address sender, java.util.Map<java.lang.Short,java.util.List<Message>> map)
protected void	UNICAST3.handleBatchReceived(UNICAST3.ReceiverEntry entry, Address sender, java.util.List<Tuple<java.lang.Long,Message>> msgs, boolean oob)
protected int	TP.BaseBundler.numMessages(java.util.Map<SingletonAddress,java.util.List<Message>> msgs)
protected java.lang.String	UNICAST2.printMessageList(java.util.List<Message> list)
protected java.lang.String	UNICAST.printMessageList(java.util.List<Message> list)
protected java.lang.String	UNICAST3.printMessageList(java.util.List<Tuple<java.lang.Long,Message>> list)
protected void	UNICAST3.processInternalMessage(Table<Message> win, Address sender)
protected void	UNICAST3.removeAndDeliver(java.util.concurrent.atomic.AtomicBoolean processing, Table<Message> win, Address sender) Try to remove as many messages as possible from the table as pass them up.
protected int	UNICAST.removeAndDeliver(java.util.concurrent.atomic.AtomicBoolean processing, Table<Message> win, Address sender) Try to remove as many messages as possible from the table as pass them up.
protected void	SEQUENCER2.removeAndDeliver(java.util.concurrent.atomic.AtomicBoolean processing, Table<Message> win, Address sender)
protected void	UNICAST2.removeAndPassUp(Table<Message> win, Address sender) Try to remove as many messages as possible and pass them up.
protected void	TP.BaseBundler.sendBundledMessages(java.util.Map<SingletonAddress,java.util.List<Message>> msgs, ByteArrayDataOutputStream out) Sends all messages in the map.
protected void	TP.BaseBundler.sendMessageList(Address dest, Address src, byte[] cluster_name, java.util.List<Message> list, boolean reset, ByteArrayDataOutputStream out)
static void	TP.writeMessageList(Address dest, Address src, byte[] cluster_name, java.util.List<Message> msgs, java.io.DataOutput dos, boolean multicast, short transport_id) Write a list of messages with the *same* destination and src addresses.

参数类型为Message的com.fr.third.jgroups.protocols中的构造器

构造器和说明
TP.SingleMessageHandler(Message msg)

类型变量类型为Message的com.fr.third.jgroups.protocols中的构造器参数

构造器和说明
UNICAST.ReceiverEntry(Table<Message> received_msgs, short recv_conn_id)
UNICAST2.ReceiverEntry(Table<Message> received_msgs, short recv_conn_id)
UNICAST3.Entry(short conn_id, Table<Message> msgs)
UNICAST3.ReceiverEntry(Table<Message> received_msgs, short recv_conn_id)

com.fr.third.jgroups.protocols.pbcast中Message的使用

声明为Message的com.fr.third.jgroups.protocols.pbcast中的字段

限定符和类型	字段和说明
protected static Message	NAKACK2.DUMMY_OOB_MSG

类型参数类型为Message的com.fr.third.jgroups.protocols.pbcast中的字段

限定符和类型	字段和说明
protected BoundedList<Message>	NAKACK2.become_server_queue
protected BoundedList<Message>	NAKACK.become_server_queue
protected static Filter<Message>	NAKACK2.dont_loopback_filter
protected Filter<Message>	NAKACK2.no_dummy_and_no_oob_delivered_msgs_and_no_dont_loopback_msgs
protected java.util.concurrent.ConcurrentMap<Address,Table<Message>>	NAKACK2.xmit_table Map to store sent and received messages (keyed by sender)

返回Message的com.fr.third.jgroups.protocols.pbcast中的方法

限定符和类型	方法和说明
protected Message	NAKACK2.msgFromXmitRsp(Message msg, NakAckHeader2 hdr)

返回变量类型为Message的类型的com.fr.third.jgroups.protocols.pbcast中的方法

限定符和类型	方法和说明
protected Table<Message>	NAKACK2.createTable(long initial_seqno)
Table<Message>	NAKACK2.getWindow(Address sender) Returns the receive window for sender; only used for testing.

参数类型为Message的com.fr.third.jgroups.protocols.pbcast中的方法

限定符和类型	方法和说明
protected void	NAKACK2.deliver(Message msg, Address sender, long seqno, java.lang.String error_msg)
protected void	NAKACK2.handleMessage(Message msg, NakAckHeader2 hdr) Finds the corresponding retransmit buffer and adds the message to it (according to seqno).
protected void	STABLE.handleRegularMessage(Message msg)
protected void	NAKACK2.handleXmitRsp(Message msg, NakAckHeader2 hdr)
protected Message	NAKACK2.msgFromXmitRsp(Message msg, NakAckHeader2 hdr)
protected void	NAKACK2.queueMessage(Message msg, long seqno)
protected void	NAKACK2.send(Event evt, Message msg) Adds the message to the sent_msgs table and then passes it down the stack.
protected void	NAKACK.send(Event evt, Message msg) Adds the message to the sent_msgs table and then passes it down the stack.
protected void	NAKACK2.sendXmitRsp(Address dest, Message msg) Sends a message msg to the requester.
boolean	NAKACK2.Counter.visit(long seqno, Message element, int row, int column)

类型变量类型为Message的com.fr.third.jgroups.protocols.pbcast中的方法参数

限定符和类型	方法和说明
protected void	NAKACK2.handleMessages(Address dest, Address sender, java.util.List<Tuple<java.lang.Long,Message>> msgs, boolean oob, AsciiString cluster_name)
protected void	NAKACK2.removeAndPassUp(Table<Message> buf, Address sender, boolean loopback, AsciiString cluster_name) Efficient way of checking whether another thread is already processing messages from sender.
protected static long	NAKACK2.sizeOfAllMessages(Table<Message> buf, boolean include_headers)

com.fr.third.jgroups.protocols.relay中Message的使用

返回Message的com.fr.third.jgroups.protocols.relay中的方法

限定符和类型	方法和说明
protected Message	RELAY2.copy(Message msg) Copies the message, but only the headers above the current protocol (RELAY) (or RpcDispatcher related headers)
protected Message	Relayer.Route.createMessage(Address target, Address final_destination, Address original_sender, Message msg)

参数类型为Message的com.fr.third.jgroups.protocols.relay中的方法

限定符和类型	方法和说明
protected Message	RELAY2.copy(Message msg) Copies the message, but only the headers above the current protocol (RELAY) (or RpcDispatcher related headers)
protected Message	Relayer.Route.createMessage(Address target, Address final_destination, Address original_sender, Message msg)
protected void	RELAY2.deliver(Address dest, Address sender, Message msg)
protected void	RELAY2.deliverLocally(SiteAddress dest, SiteAddress sender, Message msg)
protected void	RELAY2.forwardTo(Address next_dest, SiteAddress final_dest, Address original_sender, Message msg, boolean forward_to_current_coord)
protected void	RELAY2.handleMessage(RELAY2.Relay2Header hdr, Message msg) Called to handle a message received by the transport
protected void	RELAY2.handleRelayMessage(RELAY2.Relay2Header hdr, Message msg) Called to handle a message received by the relayer
void	Relayer.Bridge.receive(Message msg)
protected void	RELAY2.route(SiteAddress dest, SiteAddress sender, Message msg) Routes the message to the target destination, used by a site master (coordinator)
void	Relayer.Route.send(Address final_destination, Address original_sender, Message msg)
protected void	RELAY2.sendToBridges(Address sender, Message msg, java.lang.String... excluded_sites) Sends the message via all bridges excluding the excluded_sites bridges

com.fr.third.jgroups.protocols.tom中Message的使用

返回变量类型为Message的类型的com.fr.third.jgroups.protocols.tom中的方法

限定符和类型	方法和说明
java.util.List<Message>	DeliveryManagerImpl.getNextMessagesToDeliver()
java.util.List<Message>	DeliveryManager.getNextMessagesToDeliver() returns an ordered list with the messages to be deliver.

参数类型为Message的com.fr.third.jgroups.protocols.tom中的方法

限定符和类型	方法和说明
long	DeliveryManagerImpl.addLocalMessageToDeliver(MessageID messageID, Message message, ToaHeader header)
long	DeliveryManagerImpl.addRemoteMessageToDeliver(MessageID messageID, Message message, long remoteSequenceNumber)
void	TOA.deliver(Message message)
void	DeliveryProtocol.deliver(Message message) deliver a message
void	DeliveryManagerImpl.deliverSingleDestinationMessage(Message msg, MessageID messageID) delivers a message that has only as destination member this node

com.fr.third.jgroups.stack中Message的使用

返回Message的com.fr.third.jgroups.stack中的方法

限定符和类型	方法和说明
Message	NakReceiverWindow.get(long seqno) Returns the message from xmit_table
Message	NakReceiverWindow.remove()
Message	NakReceiverWindow.remove(boolean acquire_lock, boolean remove_msg)

返回变量类型为Message的类型的com.fr.third.jgroups.stack中的方法

限定符和类型	方法和说明
java.util.List<Message>	NakReceiverWindow.get(long from, long to) Returns a list of messages in the range [from .. to], including from and to
java.util.List<Message>	NakReceiverWindow.removeMany(java.util.concurrent.atomic.AtomicBoolean processing) Removes as many messages as possible
java.util.List<Message>	NakReceiverWindow.removeMany(java.util.concurrent.atomic.AtomicBoolean processing, boolean remove_msgs, int max_results) Removes as many messages as possible

参数类型为Message的com.fr.third.jgroups.stack中的方法

限定符和类型	方法和说明
protected boolean	Protocol.accept(Message msg) Called by the default implementation of Protocol.up(MessageBatch) for each message to determine if the message should be removed from the message batch (and handled by the current protocol) or not.
boolean	NakReceiverWindow.add(long seqno, Message msg) Adds a message according to its seqno (sequence number).

com.fr.third.jgroups.tests中Message的使用

返回Message的com.fr.third.jgroups.tests中的方法

限定符和类型	方法和说明
protected static Message	UnicastTestTcpSlow.readMessage(byte[] buf, int offset, int length)
protected static Message	UnicastTestTcp.readMessage(java.io.DataInput in)

返回变量类型为Message的类型的com.fr.third.jgroups.tests中的方法

限定符和类型	方法和说明
java.util.List<Message>	ParseMessages.parse()

参数类型为Message的com.fr.third.jgroups.tests中的方法

限定符和类型	方法和说明
java.lang.Object	MessageDispatcherSpeedTest.handle(Message msg)
void	UnicastTestTcpSlow.receive(Message msg)
void	UnicastTestTcp.receive(Message msg)
void	UnicastTest.MyReceiver.receive(Message msg)
void	RoundTrip.receive(Message msg) On the server: receive a request, send a response.
void	PingPong.receive(Message msg)
void	LargeState.receive(Message msg)
void	FlowControlTest.receive(Message msg)
protected static void	UnicastTestTcp.writeMessage(Message msg, java.io.DataOutputStream out)

com.fr.third.jgroups.tests.perf中Message的使用

参数类型为Message的com.fr.third.jgroups.tests.perf中的方法

限定符和类型	方法和说明
void	MPerf.receive(Message msg)

com.fr.third.jgroups.util中Message的使用

声明为Message的com.fr.third.jgroups.util中的字段

限定符和类型	字段和说明
protected Message[][]	RetransmitTable.matrix
protected Message[]	MessageBatch.messages The storage of the messages; removed messages have a null element

类型参数类型为Message的com.fr.third.jgroups.util中的字段

限定符和类型	字段和说明
protected java.util.NavigableMap<java.lang.Long,Message>	ForwardQueue.forward_table Maintains messages forwarded to the target which which no ack has been received yet.

返回Message的com.fr.third.jgroups.util中的方法

限定符和类型	方法和说明
Message[]	MessageBatch.array() Returns the underlying message array.
static Message	Util.byteBufferToMessage(byte[] buffer, int offset, int length)
Message	MessageBatch.first()
Message	RetransmitTable.get(long seqno)
protected Message[]	RetransmitTable.getRow(int index) Returns a row.
Message	MessageBatch.last()
Message	MessageBatch.BatchIterator.next()
Message	RetransmitTable.putIfAbsent(long seqno, Message msg) Adds a message if the element at the given index is null.
Message	RetransmitTable.remove(long seqno) Removes the message with seqno from the table, nulls the index

返回变量类型为Message的类型的com.fr.third.jgroups.util中的方法

限定符和类型	方法和说明
java.util.List<Message>	RetransmitTable.get(long from, long to)
java.util.Collection<Message>	MessageBatch.getMatchingMessages(short id, boolean remove) Removes and returns all messages which have a header with ID == id
java.util.Iterator<Message>	MessageBatch.iterator() Iterator which iterates only over non-null messages, skipping null messages

参数类型为Message的com.fr.third.jgroups.util中的方法

限定符和类型	方法和说明
MessageBatch	MessageBatch.add(Message msg)
static short	Util.getScope(Message msg)
static Buffer	Util.messageToByteBuffer(Message msg)
boolean	RetransmitTable.put(long seqno, Message msg) Adds a new message to the index computed as a function of seqno
Message	RetransmitTable.putIfAbsent(long seqno, Message msg) Adds a message if the element at the given index is null.
void	ForwardQueue.receive(long id, Message msg)
void	MyReceiver.receive(Message msg)
MessageBatch	MessageBatch.remove(Message msg) Removes the current message (found by indentity (==)) by nulling it in the message array
MessageBatch	MessageBatch.replace(Filter<Message> filter, Message replacement, boolean match_all) Replaces all messages which match a given filter with a replacement message
MessageBatch	MessageBatch.replace(Message existing_msg, Message new_msg) Replaces a message in the batch with another one
void	ForwardQueue.send(long id, Message msg)
static void	Util.setScope(Message msg, short scope)
T	MessageBatch.Visitor.visit(Message msg, MessageBatch batch) Called when iterating over the message batch

类型变量类型为Message的com.fr.third.jgroups.util中的方法参数

限定符和类型	方法和说明
MessageBatch	MessageBatch.remove(Filter<Message> filter) Removes all messages which match filter
MessageBatch	MessageBatch.replace(Filter<Message> filter, Message replacement, boolean match_all) Replaces all messages which match a given filter with a replacement message

类型变量类型为Message的com.fr.third.jgroups.util中的构造器参数

构造器和说明
MessageBatch(Address dest, Address sender, AsciiString cluster_name, boolean multicast, java.util.Collection<Message> msgs)
MessageBatch(Address dest, Address sender, AsciiString cluster_name, boolean multicast, java.util.Collection<Message> msgs, Filter<Message> filter)
MessageBatch(Address dest, Address sender, AsciiString cluster_name, boolean multicast, java.util.Collection<Message> msgs, Filter<Message> filter)
MessageBatch(java.util.Collection<Message> msgs)